BitNami provides a free all-in-one tool to install Drupal, Joomla!, WordPress and many other popular open source apps on top of XAMPP. Download BitNami XAMPP

The following packages are extensions (add-ons) for the above XAMPP package. You don't need them for normal work.

XAMPP Portable Lite

"XAMPP portable Lite" is an additional extra small XAMPP edition. Configured with relative paths you can also use it on usb devices.

After the installation is complete, you will find XAMPP under Start | Programs | XAMPP. You can use the XAMPP Control Panel to start/stop all server and also install/uninstall services.

The XAMPP control panel for start/stop Apache, MySQL, FilaZilla & Mercury or install these server as services.

Method B: "Installation" without the Installer

Unzip the zip archives into the folder of your choice. XAMPP is extracting to the subdirectory "[Ziel]\xampp" below the selected target directory. Now start the file "setup_xampp.bat", to adjust the XAMPP configuration to your system.

If you choose a root directory "C:\" as target, you must not start "setup_xampp.bat".

Like with the installer version, you can now use the "XAMPP Control Panel" for additional tasks.

If you extract XAMPP in a top level folder like "C:\" or "D:\", you can start most servers like Apache or MySQL directly without execution of the file "setup_xampp.bat".

Not using the setup script, or selecting relative paths in the setup script, is preferred if you are installing XAMPP on a usb drive. Because on each pc such a drive can have an other drive letter. You can switch from absolute to relative paths at any time with the setup script.

The universal control center is the "XAMPP Control Panel" (thanks www.nat32.com). It is started with:

\xampp\xampp-control.exe

As you know this from older XAMPP versions, you can also use some batchfiles to start/stop the servers:

Apache & MySQL start:

\xampp\xampp_start.exe

Apache & MySQL stop:

\xampp\xampp_stop.exe

Nur Apache start:

\xampp\apache_start.bat

Nur Apache stop:

\xampp\apache_stop.bat

Nur MySQL start:

\xampp\mysql_start.bat

Nur MySQL stop:

\xampp\mysql_stop.bat

Mercury Mailserver start:

\xampp\mercury_start.bat

Mercury Mailserver stop:

\xampp\mercury_stop.bat

FileZilla Server start:

\xampp\filezilla_start.bat

FileZilla Server stop:

\xampp\filezilla_stop.bat

Test

After starting of Apache (and MySQL), go to the address http://localhost/ or http://127.0.0.1/ in your browser and examine all of the XAMPP examples and tools.

Installing a particular server as as service

Each server in XAMPP you can install also as Windows service:

Apache service install:

\xampp\apache\apache_installservice.bat

Apache service uninstall:

\xampp\apache\apache_uninstallservice.bat

MySQL service install:

\xampp\mysql\mysql_installservice.bat

MySQL service uninstall:

\xampp\mysql\mysql_uninstallservice.bat

FileZilla service (un)install:

\xampp\filezilla_setup.bat

Mercury:

No service installation available!

With a new XAMPP version, there is normally a upgrade package too. Additionally, we have sometimes small patches between the releases.

An upgrade is always problematically and there can be errors in the upgrade process. Because of this, you should always make a backup from your XAMPP folder before you upgrade it. werden.

We are trying to adjust your configuration files during the upgrade progress, if necessary. Especially if a new XAMPP have a lot of changes compared to the old one, we are providing no upgrade package for security reasons. Sorry.

As with the add-ons, install the upgrade directly into the XAMPP directory (e.g. "C:\xampp"). And you must also start the setup script "setup_xampp.bat".

As mentioned at another place, XAMPP is not meant for production use but only for developers in a development environment. XAMPP is configured is to be as open as possible and to allow the web developer anything he/she wants. For development environments this is great but in a production environment it could be fatal.

Here a list of missing security in XAMPP:

• The MySQL administrator (root) has no password.
• The MySQL daemon is accessible via network.
• phpMyAdmin is accessible via network.
• The XAMPP demopage is accessible via network.
• The default users of Mercury and FileZilla are known.

All points can be a huge security risk. Especially if XAMPP is accessible via network and people outside your LAN. It can also help to use a firewall or a (NAT-) router. In case of a router or firewall, your pc is normally not accessible via network. It is up to you to fix these problems. As a small help there is the "XAMPP Security console".

Please secure XAMPP before publishing anything online. A firewall or an external router are only sufficient for low levels of security. For slightly more security, you can run the "XAMPP Security console" and assign passwords.

If you want have your XAMPP accessible from the internet, you should go to the following URI which can fix some problems:
http://localhost/security/

With the security console you can set a password for the MySQL user "root" and phpMyAdmin. You can also enable a authentication for the XAMPP demopages.

This web based tool does not fix any additional security issues! Especially the FileZilla FTP server and the Mercury mail server you must secure yourself. If you don't need these servers, don't start them. A server which is not started, is very secure!

If you installed XAMPP using the installer version, please use the Uninstaller! The Uninstaller will delete all XAMPP entries from your registry and it will uninstall some installed services included with XAMPP. We highly recommend that you use the Uninstall program for removing XAMPP installations from the Installer version.

Please backup all the data you want to keep before uninstalling XAMPP.

XAMPP Lite (means "light" as in "light-weight") is a smaller bundle of XAMPP components, which is recommended for quick work using only PHP and MySQL. Some servers or tools such as Mercury Mail and FileZilla FTP are missing in the Lite version.

Problems? See also:
»FAQ - XAMPP for Windows« The main directory for all WWW documents is \xampp\htdocs. If you put a file "test.html" in this directory, you can access it with the URI "http://localhost/test.html".

And "test.php"? Just use "http://localhost/test.php". A simple testscript can be:
<?php
    echo 'Hallo world';
?>

A new subdirectory for your web? Just make a new directory (e.g. "new") inside the directory "\xampp\htdocs" (best without whitespaces and only ASCII), create a test file in this directory and access it with "http://localhost/new/test.php".

Further specifics:

HTML:

Executable: \xampp\htdocs
Allowed endings: .html .htm
=> basic package

SSI:

Executable: \xampp\htdocs
Allowed endings: .shtml
=> basic package

CGI:

Executable: \xampp\htdocs and \xampp\cgi-bin
Allowed endings: .cgi
=> basic package

PHP:

Executable: \xampp\htdocs and \xampp\cgi-bin
Allowed endings: .php
=> basic package

Perl:

Executable: \xampp\htdocs and \xampp\cgi-bin
Allowed endings: .pl
=> basic package

Apache::ASP Perl:

Executable: \xampp\htdocs
Allowed endings: .asp
=> basic package

JSP Java:

Executable: \xampp\tomcat\webapps\java (e.g.)
Allowed endings: .jsp
=> Tomcat add-on

Servlets Java:

Executable: \xampp\tomcat\webapps\java (e.g.)
Allowed endings: .html (u.a)
=> Tomcat add-on

Yes, that's possible with XAMPP. After moving of the XAMPP directory, jou must execute "setup_xampp.bat". The paths in the configuration files will be adjusted with this step.

If you have installed any server as Windows service, you must first remove the Windows service, and after the moving you can install the service again.

Warning:
The configuration files from your own scripts, like for the software phpBB, are not adjusted. This task is up to you. But it's possible to write a "plug-in" the installer. With such a plug-in, the installer can adjust such files too..

The standard filename for the Apache function "DirectoryIndex" is "index.html" or "index.php". Every time you are just browsing to a folder (e.g. "http://localhost/xampp/"), and Apache can find such a file, Apache is displaying this file instead of a directory listing.

Almost all settings in XAMPP you can change with configuration files. Just open the file in a textedit and change the setting you want. Only FileZilla and Mercury should be configured with the application config tool.

A list of the configuration files you can find in the table configuration files.

Problems? See also:
»FAQ - XAMPP for Windows« Still questions? See also:
»Apache Friends Support Forum«

Configuration files

Logfiles

common directories